Check Floor Wire No For Short

a. Release the activation prevention mechanism built into connector "B" (See CHECK MODE PROCEDURE ).

b. Measure the resistance according to the value(s) in the table below. OK

TESTER CONNECTION

SPECIFI]

ED CONDITION CI

Tester Connection

Condition

Specified Condition

P10-1 (PL+) - P10-2 (PL-)

Always

1ART

2006 RESTRAINTS Supplemental Restraint System - Sequoia

2006 RESTRAINTS Supplemental Restraint System - Sequoia

NG: REPAIR OR REPLACE FLOOR WIRE NO.2

4. CHECK FLOOR WIRE NO.2 (FOR OPEN)

a. Measure the resistance according to the value(s) in the table below.

TESTER CONNECTION

SPECIFI]

ED CONDITION CI

Tester Connection

Condition

Specified Condition

P10-1 (PL+) - P10-2 (PL-)

Always

Below 1 ohms

OK: Go to step 11

2006 RESTRAINTS Supplemental Restraint System - Sequoia

NG: REPAIR OR REPLACE FLOOR WIRE NO.2

5. CHECK FLOOR WIRE NO.2 (TO GROUND)

a. Measure the resistance according to the value(s) in the table below.

TESTER CONNECTION SPECIFIED CONDITION CHART

Tester Connection

Condition

Specified Condition

P10-1 (PL+) - Body ground

Always

1 Mohms or higher

P10-2 (PL-) - Body ground

Always

1 Mohms or higher

OK: Go to step 11

2006 RESTRAINTS Supplemental Restraint System - Sequoia

2006 RESTRAINTS Supplemental Restraint System - Sequoia

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment