Components

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 165: Identifying Automatic Transmission Assembly Components (2 Of 2) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

REMOVAL

1. JACK UP VEHICLE

2. REMOVE ENGINE UNDER COVER NO.1

3. REMOVE FRONT SUSPENSION MEMBER BRACKET

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia a. Remove the 4 bolts and 2 front suspension member brackets. Torque: 33 N*m (336 kgf*cm, 24 ft.*lbf)

Fig. 166: Removing Front Suspension Member Bracket Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

4. DRAIN AUTOMATIC TRANSMISSION FLUID

a. Remove the drain plug and gasket, and drain the ATF.

b. Install a new gasket and the drain plug.

5. REMOVE FRONT EXHAUST PIPE (See REMOVAL )

6. REMOVE PROPELLER SHAFT HEAT INSULATOR

a. Remove the 2 bolts and heat insulator.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 167: Removing Propeller Shaft Heat Insulator Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

REMOVE FRONT PROPELLER SHAFT (See REMOVAL ) REMOVE REAR PROPELLER SHAFT (See REMOVAL ) DISCONNECT SPEED SENSOR NT AND SP2 CONNECTOR

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 168: Disconnecting Speed Sensor NT And SP2 Connector Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

10. DISCONNECT TRANSMISSION WIRE CONNECTOR

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 169: Disconnecting Transmission Wire Connector Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

11. DISCONNECT PARK / NEUTRAL POSITION SWITCH CONNECTOR

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 170: Disconnecting Park / Neutral Position Switch Connector Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

12. SEPARATE COLUMN SHIFT TRANSMISSION CONTROL CABLE

a. Remove the nut and disconnect the shift control cable.

b. Remove the 2 bolts and shift control cable bracket from the transmission.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 171: Removing Shift Control Cable Bracket From Transmission Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

13. DISCONNECT OIL COOLER PIPE

a. Remove the 3 bolts and clamps.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 172: Removing Bolts And Clamps

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 172: Removing Bolts And Clamps

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Disconnect the 2 oil cooler pipes.

SST 09023-12701

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 173: Disconnecting Oil Cooler Pipes Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment