Components

2006 ELECTRICAL Charging - Sequoia

Fig. 7: Identifying Generator Components & Torque Specifications (1 Of 2) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 8: Identifying Generator Components & Torque Specifications (2 Of 2) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

REMOVAL

1. REMOVE ENGINE UNDER COVER NO.1

2. REMOVE THROTTLE BODY COVER

3. DISCONNECT CABLE FROM NEGATIVE (-) BATTERY TERMINAL

4. DISCONNECT INTAKE AIR CONNECTOR FROM THROTTLE BODY

5. REMOVE DRIVE BELT

a. Loosen the belt tension by turning the belt tensioner counterclockwise, and remove the drive belt.

HINT:

The pulley bolt for the belt tensioner has a left hand thread.

2006 ELECTRICAL Charging - Sequoia

Fig. 9: Loosening Belt Tension By Turning Belt Tensioner Counterclockwise Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

6. REMOVE PS VANE PUMP FROM ENGINE (See REMOVAL )

7. REMOVE GENERATOR

a. Disconnect the generator connector.

b. Remove the terminal cap and nut, and disconnect the generator wire.

c. Disconnect the wire clamp from the cord clip on the generator.

d. Remove the bolt, the 2 nuts and the generator.

DISASSEMBLY

1. REMOVE REAR END COVER

a. Remove the 3 nuts the and end cover.

b. Remove the terminal insulator.

2006 ELECTRICAL Charging - Sequoia

Fig. 10: Removing Nuts & End Cover

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 10: Removing Nuts & End Cover

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment