Connector Front View

c110343e15

Fig. 40: Identifying V2 Speed Sensor Connector Terminals Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

OK: GO TO NEXT STEP.

3. CHECK WIRE HARNESS AND CONNECTOR (SPEED SENSOR SP2 - ECM)

a. Connect the V2 speed sensor connector.

b. Disconnect the E7 ECM connector.

c. Measure the resistance.

Standard resistance

TESTER CONNECTION SPECIFIED CONDITION AND RESISTANCE REFERENCE I-1-1

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Tester Connection

Specified Condition

E7-34 (SP2+) - E7-26 (SP2-)

560 to 680 ohms at 20°C (68°F)

E7-34 (SP2+) - Body ground

10 kohms or higher

E7-26 (SP2-) - Body ground

10 kohms or higher

NG: REPAIR OR REPLACE HARNESS OR CONNECTOR

NG: REPAIR OR REPLACE HARNESS OR CONNECTOR

Toyota Vdj79r Ecm Plug
Fig. 41: Identifying E7 ECM Connector Terminals Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment