De

Fig. 423: Inspecting Clutch Disc

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2. INSPECT REVERSE CLUTCH HUB SUB-ASSEMBLY

a. Using a caliper gauge, measure the inside diameter of the reverse clutch hub bushing.

Standard drum bushing: 35.812 to 35.837 mm (1.4099 to 1.4109 in.) Maximum drum bushing: 35.887 mm (1.4129 in.)

If the inside diameter is greater than the maximum, replace the reverse clutch hub.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 424: Inspecting Reverse Clutch Hub Sub-Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

3. INSPECT FORWARD CLUTCH HUB SUB-ASSEMBLY

a. Using a caliper gauge, measure the inside diameter of the forward clutch hub bushing.

Standard drum bushing: 26.037 to 26. 062 mm (1.0251 to 1.0261 in.) Maximum drum bushing: 26.112 mm (1.0280 in.)

If the inside diameter is greater than the maximum, replace the forward clutch hub.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Forward Hub
Fig. 425: Inspecting Forward Clutch Hub Sub-Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment