De

Fig. 260: Inspecting Clutch Disc

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

4. INSPECT NO. 3 BRAKE PISTON RETURN SPRING SUB-ASSEMBLY

a. Using a vernier caliper, measure the free length of the spring together with the spring seat.

Standard free length: 15.72 mm (0.619 in.)

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 261: Inspecting No. 3 Brake Piston Return Spring Sub-Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

5. INSPECT FRONT PLANETARY GEAR ASSEMBLY

a. Using a feeler gauge, measure the front planetary pinion gear thrust clearance.

Standard clearance: 0.20 to 0.60 mm (0.0078 to 0.0236 in.) Maximum clearance: 0.65 mm (0.0256 in.)

If the clearance is greater than the maximum, replace the front planetary gear assembly.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 262: Measuring Front Planetary Pinion Gear Thrust Clearance Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Using a dial indicator, measure the inside diameter of the front planetary gear bushing.

Maximum inside diameter: 57.48 mm (2.2630 in.)

If the inside diameter is greater than the maximum, replace the front planetary gear.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 263: Measuring Inside Diameter Of Front Planetary Gear Bushing Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment