Disconnect Connector

a. Pull the release bar and disconnect the connector.

2006 BRAKES Brake Control - Sequoia

Fig. 101: Disconnecting Connector

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 101: Disconnecting Connector

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2. DISCONNECT BRAKE LINE

a. Using SST, disconnect the 6 brake lines from the actuator assembly.

SST 09023-00101, 09023-38201 Torque: 10 mm nut 15 N*m (155 kgf*cm, 11 ft.*lbf) 12 mm nut

• When disconnecting the brake lines, use tags or make a memo to identify the place to reconnect.

• At the time of installation, connect each brake line to the correct position.

2006 BRAKES Brake Control - Sequoia

Fig. 102: Disconnecting Brake Line

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 102: Disconnecting Brake Line

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

3. REMOVE ABS AND TRACTION ACTUATOR ASSEMBLY

a. Remove the 3 nuts and actuator assembly with the actuator bracket.

Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf) DISASSEMBLY

1. REMOVE BRAKE ACTUATOR BRACKET NO.1

a. Remove the 3 bolts and actuator bracket.

b. Remove the 3 cushions from the actuator bracket.

2. REMOVE SKID CONTROL ECU

a. Using a E5 "Torx" wrench, remove the 3 screws and skid control ECU.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment