Disconnection Of Connector For Center Airbag Sensor Assembly Center

a. Pull the lever by pushing part A as shown in the illustration and disconnect the holder (with connectors).

Fig. 12: Pulling Lever By Pushing Part A Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2006 RESTRAINTS Supplemental Restraint System - Sequoia

HINT:

Perform the following procedures when replacing the holder.

b. Remove the holder.

1. Using a screwdriver, unlock the retainer.

Fig. 13: Unlocking Retainer With Screwdriver Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2. Release the fitting lances and remove the holder.

Fig. 14: Releasing Fitting Lance And Removing Holder Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

c. Install the holder.

1. Install the connectors to the holder. (When locking, a click sound can be heard.)

HINT:

The retainer is locked when the holder is connected.

2006 RESTRAINTS Supplemental Restraint System - Sequoia

Fig. 15: Installing Connectors To Holder Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment