Dlccan Vim

c121765e01

Fig. 22: Connecting Intelligent Tester To DLC3 Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

NOTE: All DTCs and freeze frame data recorded in the ECM will be erased if: 1) the intelligent tester is used to change the ECM from normal mode to check mode or vice versa; or 2) during check mode, the ignition switch is turned from ON to ACC or OFF.

Before changing to check mode, make notes of the DTCs and freeze frame data.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 23: Identifying MIL Flash Pattern

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 23: Identifying MIL Flash Pattern

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

g. Start the engine. The MIL should turn off after the engine starts.

h. Perform "MONITOR DRIVE PATTERN" for the ECT test (See MONITOR DRIVE PATTERN ).

(Or, simulate the conditions of the malfunction described by the customer).

i. After simulating the malfunction conditions, use the intelligent tester diagnosis selector to check the DTC and freeze frame data.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment