Fig Installing Thrust Needle Roller Bearing Courtesy of Toyota Motor Sales Usa Inc

c. Install the input shaft sub-assembly with the direct and reverse multiple disc assembly onto the transmission case.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 324: Installing Input Shaft Sub-Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

32. INSTALL OIL PUMP ASSEMBLY

a. Install the No. 1 thrust bearing race to the front oil pump.

Standard No. 1 thrust bearing race diameter

THRUST BEARING RACE DIAMETER SPECIFICATIONS

Item

Inside

Outside

Race

74.2 mm (2.921 in.)

87.74 mm (3.454 in.)

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 325: Installing No. 1 Thrust Bearing Race To Front Oil Pump Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Coat a new O-ring with ATF, and install it around the oil pump assembly.

c. Place the oil pump through the input shaft, and align the bolt holes of the oil pump assembly with the transmission case.

d. Hold the input shaft, and lightly press the oil pump body to slide the oil seal rings into the overdrive direct clutch drum.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment