Inspect And Adjust Shift Lever Position

a. When shifting the shift lever from the N position to other positions, check that the lever can be shifted smoothly and accurately to each position and that the position indicator comes on in accordance with the shift lever position.

If the indicator and shift lever position do not match, carry out the following adjustment procedures.

1. Remove the nut and disconnect the shift control cable from the control shaft lever.

2. Move the control shaft fully rearward.

3. Return the control shaft lever 2 notches to the N position.

4. Set the shift lever to the N position.

5. Connect the shift control cable and temporarily install the control shaft lever nut.

6. While holding the shift lever lightly toward the R position side, tighten the control shaft lever nut.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment