Inspect Differential Case Runout

a. Install the differential case in the differential carrier (See REPLACEMENT ).

2006 DRIVELINE/AXLES Differential - Sequoia

Differential Case
Fig. 118: Identifying Matchmarks On Ring Gear & Differential Case Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Using a dial indicator, measure the differential case runout. Maximum case runout: 0.04 mm (0.0016 in.)

c. Remove the differential case.

2006 DRIVELINE/AXLES Differential - Sequoia

Differential Case Runout
Fig. 119: Inspecting Differential Case Runout Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

17. REMOVE REAR DIFFERENTIAL CASE BEARING

a. Using SST, remove the 2 side bearings from the differential case.

SST 09950-40011 (09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 0995704010, 09958-04011), 09950-60010 (09951-00480)

HINT:

Fix the claws of SST to the notch in the differential case.

2006 DRIVELINE/AXLES Differential - Sequoia

Differential

0 C124140E01

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment