Inspect Fluid Coupling

a. Remove the 4 nuts and fan from the fluid coupling.

2006 ENGINE Cooling - Sequoia

CI A122967

Fig. 8: Removing Nuts & Fan From Fluid Coupling Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Check that the fluid coupling is not damaged and that no silicon oil leaks. If necessary, replace the fluid coupling.

c. Reinstall the fan to the fluid coupling with the 4 nuts. Torque: 8.5 N*m (85 kgf*cm, 75 in.*lbf)

2006 ENGINE Cooling - Sequoia

Fig. 9: Checking Fluid Coupling For Damaged & Silicon Oil Leaks Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

3. INSPECT FAN PULLEY BRACKET

a. Check the turning smoothness of the fan pulley.

If necessary, replace the pulley bracket.

4. INSPECT TIMING BELT COMPONENTS

(See INSPECTION )

2006 ENGINE Cooling - Sequoia

Fig. 10: Inspecting Fan Pulley Bracket

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 10: Inspecting Fan Pulley Bracket

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment