a. Remove the 10 bolts, side bearing retainer and differential case.
b. Coat 3 or 4 teeth at three different positions on the ring gear with red lead primer.
c. Install the differential case and side bearing retainer with the 10 bolts. Torque: 69 N*m (700 kgf*cm, 51 ft.*lbf)
d. Hold the companion flange firmly and rotate the ring gear in both directions.
e. Remove the 10 bolts, side bearing retainer and differential case.
f. Inspect the tooth contact pattern.
2006 DRIVELINE/AXLES Differential - Sequoia
1. If the teeth are not contacting properly, use the following table to select a proper washer for correction.
Was this article helpful?