Install Forward Clutch Piston

a. Coat 2 new O-rings with ATF, and install them on the No. 1 forward clutch piston.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

p d028525e01

Fig. 456: Installing O-Rings On No. 1 Forward Clutch Piston Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

12. INSTALL NO. 1 CLUTCH BALANCER

a. Coat a new O-ring with ATF and install it on the clutch balancer.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 457: Installing O-Rings On Clutch Balancer Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Install the No. 1 clutch balancer and forward clutch return spring sub-assembly. NOTE: Be careful not to damage the O-ring.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 458: Installing No. 1 Clutch Balancer And Forward Clutch Return Spring Sub-Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

c. Place SST on the No. 1 clutch balancer, and compress the return spring with a press. SST 09350-30020 (09350-07040, 09350-07070)

d. Install the snap ring with a snap ring expander.

e. Be sure the end gap of the snap ring is not aligned with the spring retainer claw.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment