Maximum runout mm in

If the runout exceeds the specification, replace the intermediate shaft with a new one.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

d028529e01

Fig. 272: Checking Intermediate Shaft Runout Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Using a micrometer, check the outer diameter of the intermediate shaft positions shown in the diagram.

Standard diameter:

A: 25.962 to 25.975 mm (1.0221 to 1.026 in.) B: 25.962 to 25.975 mm (1.0221 to 1.026 in.) C: 32.062 to 32.075 mm (1.262 to 1.2627 in.) D: 32.062 to 32.075 mm (1.2622 to 1.2627 in.) Standard diameter: A: 25.912 mm (1.0202 in.) B: 25.912 mm (1.0202 in.) C: 32.012 mm (1.2603 in.)

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

If the outer diameter is outside the standard, replace the intermediate shaft with the a new one.

Fig. 273: Checking Outer Diameter Of Intermediate Shaft Positions Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment