Maximum tip clearance mm in

If the tip clearance is greater than the maximum, replace the drive gear, driven gear or pump body.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 377: Measuring Clearance Between Driven Gear Teeth And Drive Gear Teeth Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

d. Using a steel straightedge and feeler gauge, measure the side clearance of both gears. Standard side clearance: 0.02 to 0.05 mm (0.0008 to 0.002 in.)

Maximum side clearance: 0.05 mm (0.002 in.)

If the side clearance of both is gears greater than the maximum, replace the drive gear, driven gear or pump body.

e. There are 5 different thicknesses for the drive and driven gears.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 378: Measuring Side Clearance Of Both Gears Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment