NOTE The antirattle spring and clip can be used again provided that they have sufficient rebound no deformation cracks or wear and have had all rust dirt and foreign particles cleaned off

2006 BRAKES Brake - Sequoia

Fig. 18: Removing Mounting Bolts & Caliper Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

DISASSEMBLY

1. REMOVE CYLINDER BOOT SET RINGS AND BOOTS

a. Using a screwdriver, remove the 4 cylinder boot set rings and boots.

2006 BRAKES Brake - Sequoia

Fig. 19: Removing Cylinder Boot Set Rings & Boots Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2. REMOVE FRONT DISC BRAKE PISTON

a. Prepare the wooden plate to hold the pistons.

2006 BRAKES Brake - Sequoia

Fig. 20: Removing Front Disc Brake Piston Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Place the plate between the pistons and insert a pad at one side.

c. Use compressed air to remove the pistons alternately from the cylinder.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment