Ok Vsc Trac warning light oDerates

intelligent tester main switch ON. light can be shown on the combination

OK: REPLACE SKID CONTROL ECU

2. CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU - COMBINATION METER) NG: REPAIR OR REPLACE HARNESS OR CONNECTOR

OK: GO TO NEXT STEP.

3. CHECK COMBINATION METER

a. Perform combination meter troubleshooting (See HOW TO PROCEED WITH TROUBLESHOOTING ).

NG: REPAIR OR REPLACE COMBINATION METER

OK: REPLACE SKID CONTROL ECU

BRAKE WARNING LIGHT REMAINS ON

description

The BRAKE warning light comes on when the brake fluid is insufficient, the parking brake is applied or the EBD is defective.

The skid control ECU is connected to the translate ECU via the CAN1 communication system. wiring diagram

2006 BRAKES Brake Control - Sequoia

Toyota Tercel Light Wiring Diagram
Fig. 85: Brake Warning Light Wiring Diagram Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

HINT:

Start the inspection from step 1 when using the intelligent tester and start from step 2 when not using the intelligent tester.

inspection procedure

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment