Problem Symptoms Table

HINT:

• Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

• The Matrix Chart is divided into 3 chapters. When troubleshooting, check Chapter 1 first. If instructions are given in Chapter 1 to proceed to 2 or 3, proceed as instructed.

• If the instruction "Proceed to next circuit inspection shown on problem symptoms table" is given in the flowchart for each circuit, proceed to the next suspected area in the table.

• If the problem still occurs even though there are no abnormalities in any of the circuits, check the ECM and replace it if necessary.

• When the circuit on which mark *1 is attached has a malfunction, DTC could be output.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment