Removal

1. REMOVE SPEEDOMETER SENSOR a. Disconnect the sensor connector.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 118: Disconnecting Sensor Connector Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Remove the bolt and the sensor.

c. Remove the clip and the driven gear from the sensor.

d. Remove the O-ring from the sensor.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 119: Removing O-Ring From Sensor Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2. REMOVE TRANSMISSION REVOLUTION SENSOR NT AND SP2

a. Disconnect the sensor connectors.

b. Remove the 2 bolts, revolution sensor SP2 and NT.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 120: Removing 2 Bolts, Revolution Sensor SP2 And NT Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia c. Remove the 2 O-rings from the revolution sensor SP2 and NT.

c. Remove the 2 O-rings from the revolution sensor SP2 and NT.

p c115712

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment