Remove Reverse Clutch Hub Subassembly

a. Using a screwdriver, remove the snap ring.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

A750e Transmission

Fig. 397: Removing Snap Ring

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 397: Removing Snap Ring

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Remove the reverse clutch hub sub-assembly, reverse clutch reaction sleeve, clutch cushion, plate reverse clutch flange, 5 reverse clutch discs and 4 clutch plates from the clutch drum.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Flange Sub Assy Roller Drum Assy
Fig. 398: Removing Reverse Clutch Hub Sub-Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

3. REMOVE REVERSE CLUTCH REACTION SLEEVE

a. Remove the reverse clutch reaction sleeve from the reverse clutch hub.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Gambar Clutch Hub Sleevse
Fig. 399: Removing Reverse Clutch Reaction Sleeve From Reverse Clutch Hub Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

4. REMOVE REAR CLUTCH DISC

a. Remove the clutch cushion plate, reverse clutch flange, 4 plates and 5 discs from the reverse clutch hub.

5. INSPECT REAR CLUTCH DISC (See INSPECTION )

6. INSPECT REVERSE CLUTCH HUB SUB-ASSEMBLY (See INSPECTION )

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Toyota 1kz Reverse Clutch Assembly
Fig. 400: Removing Clutch Cushion Plate Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

7. REMOVE FORWARD CLUTCH HUB SUB-ASSEMBLY

a. Remove the forward clutch hub sub-assembly from the clutch drum.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 401: Removing Forward Clutch Hub Sub-Assembly From Clutch Drum Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Remove the 2 thrust needle roller bearings from the forward clutch hub. 8. INSPECT FORWARD CLUTCH HUB SUB-ASSEMBLY (See INSPECTION )

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

p d028500e03

Fig. 402: Removing 2 Thrust Needle Roller Bearings From Forward Clutch Hub Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

9. REMOVE MULTIPLE DISC CLUTCH HUB

a. Remove the multiple disc clutch hub from the clutch drum.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Rear Clutch Hub Pic
Fig. 403: Removing Multiple Disc Clutch Hub From Clutch Drum Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Remove the No. 2 thrust bearing race and input shaft thrust bearing race rear from the multiple disc clutch hub.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

No. 2 Thrust

Rotator Cuff Wheel And Axle

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

  • Gabriele
    How to change the transaxle transmission on a 2006 sequoia?
    7 years ago

Post a comment