Remove St And Reverse Brake Piston

a. Hold the No. 2 brake piston and apply compressed air (392 kPa, 4 kgf/cm , 57 psi) to the transmission case to remove the No. 2 brake piston.

HINT:

If the piston does not pop out with compressed air, lift the piston out with needle-nose pliers.

b. Remove the O-ring from the No. 2 brake piston.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 255: Removing O-Ring From No. 2 Brake Piston Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

70. REMOVE BRAKE REACTION SLEEVE

a. Using SST, remove the reaction sleeve.

SST 09350-30020 (09350-07080)

b. Remove the O-ring from the reaction sleeve.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

D028079E04

Fig. 256: Removing O-Ring From Reaction Sleeve Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

71. REMOVE NO. 4 BRAKE PISTON

a. Using SST, remove the No. 4 brake piston.

SST 09350-30020 (09350-07090)

b. Remove the 2 O-rings from the No. 4 piston.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 257: Removing O-Rings From No. 4 Piston Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment