Sst

2. Using a snap ring expander, install a new snap ring.

f. Install the intermediate shaft No. 2 to the tube.

1. Install the shaft into the tube.

2. Using needle nose pliers, install a new snap ring.

2006 DRIVELINE/AXLES Differential - Sequoia

Fig. 59: Installing A New Intermediate Shaft No. 2 Bearing Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

g. Install a new oil seal.

1. Using SST and a plastic hammer, install a new oil seal.

SST 09223-15020

Oil seal drive in depth: 5.5 +- 0.3 mm (0.217 +- 0.012 in.)

2. Coat the oil seal lip with MP grease.

2006 DRIVELINE/AXLES Differential - Sequoia

Fig. 60: Installing New Oil Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 60: Installing New Oil Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

h. Install the clutch hub.

1. Install the clutch hub to the shaft.

2. Using a snap ring expander, install a new snap ring.

2006 DRIVELINE/AXLES Differential - Sequoia

Fig. 61: Installing Clutch Hub

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 61: Installing Clutch Hub

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

REASSEMBLY

1. INSTALL FRONT DIFFERENTIAL CASE BEARING

a. Using SST and a press, install 2 new bearings.

SST 09950-60010 (09951-00380)

Bearing press in depth: 0.3 +- 0.3 mm (0.012 +- 0.012 in.)

2006 DRIVELINE/AXLES Differential - Sequoia

Fig. 62: Installing Front Differential Case Bearing Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment