Sst

2006 DRIVELINE/AXLES Differential - Sequoia

Fig. 56: Removing Oil Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 56: Removing Oil Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

c. Remove the intermediate shaft No. 2 from the tube.

1. Using needle nose pliers, remove the snap ring.

2. Remove the shaft from the tube.

d. Remove the intermediate shaft No. 2 bearing.

1. Using a snap ring expander, remove the snap ring.

2006 DRIVELINE/AXLES Differential - Sequoia

Fig. 57: Removing Snap Ring

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 57: Removing Snap Ring

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2. Using SST, a brass bar and press, remove the bearing. SST 09950-00020

2006 DRIVELINE/AXLES Differential - Sequoia

Fig. 58: Remove Bearing Using SST, A Brass Bar & A Press Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

e. Install a new intermediate shaft No. 2 bearing.

1. Using SST and a press, install a new bearing.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment