Standard bearing and race diameter

BEARING AND RACE D]

[AMETER SPECIFICATIONS

Item

Inside

Outside

No. 7 thrust bearing race

33.4 mm (1.315 in.)

49.0 mm (1.929 in.)

Thrust needle roller bearing

32.1 mm (1.264 in.)

49.35 mm (1.943 in.)

No. 8 thrust bearing race

32.1 mm (1.264 in.)

49.0 mm (1.929 in.)

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 296: Installing Rear Planetary Ring Gear Flange Sub Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

11. INSTALL NO. 3 1-WAY CLUTCH ASSEMBLY

a. Install the No. 3 1-way clutch assembly and the 1-way clutch inner race to the intermediate shaft.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 297: Installing No. 3 1-Way Clutch Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

12. INSTALL INTERMEDIATE SHAFT

a. Install the intermediate shaft with the No. 3 1-way clutch assembly to the case.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 298: Installing Intermediate Shaft With No. 3 1-Way Clutch Assembly To Case Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Using SST, install the snap ring.

SST 09350-30020 (09350-07050, 09350-07060)

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 299: Installing Snap Ring

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 299: Installing Snap Ring

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment