Standard resistance

TESTER CONNECTION SPECIFIED CONDIT

Tester Connection

Specified Condition

1 - 2

560 to 680 ohms at 20°C (68°F)

ON AND RESISTANCE REFERENCE

NG: REPLACE SPEED SENSOR NT

NG: REPLACE SPEED SENSOR NT

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

OK: GO TO NEXT STEP.

3. CHECK WIRE HARNESS AND CONNECTOR (SPEED SENSOR NT - ECM)

a. Connect the O1 speed sensor connector.

b. Disconnect the E7 ECM connector.

c. Measure the resistance.

Standard resistance

TESTER CONNECTION SPECIFIED CONDITION AND RESISTANCE REFERENCE

Tester Connection

Specified Condition

E7-35 (NT+) - E7-27 (NT-)

560 to 680 ohms at 20°C (68°F)

E7-35 (NT+) - Body ground

10 kohms or higher

E7-27 (NT-) - Body ground

10 kohms or higher

NG: REPAIR OR REPLACE HARNESS OR CONNECTOR

NG: REPAIR OR REPLACE HARNESS OR CONNECTOR

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment