To ohms at C F

c. Connect the positive (+) lead to the terminal of the solenoid connector, and the negative (-) lead to the solenoid body.

d. Check the operating sound of the solenoid valve.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

OK: The solenoid makes operating sound. NG: REPLACE SHIFT SOLENOID VALVE S2

Fig. 72: Inspecting Shift Solenoid Valve S2 Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

OK: REPAIR OR REPLACE TRANSMISSION WIRE

DTC P0985 SHIFT SOLENOID "E" CONTROL CIRCUIT LOW (SHIFT SOLENOID VALVE SR); DTC P0986 SHIFT SOLENOID "E" CONTROL CIRCUIT HIGH (SHIFT SOLENOID VALVE SR)

description

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Shifting from 1st to 5th is performed in combination with the ON and OFF operation of the shift solenoid valves SL1, SL2, S1, S2 and SR, which is controlled by the ECM. If an open or short circuit occurs in the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated safely (See DATA LIST / ACTIVE TEST ).

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment