Torque Nm kgfcm ftlbf

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

2012 Sequoia Neutral Switch
Fig. 362: Aligning Neutral Basic Line With Switch Groove Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

f. Using a screwdriver, bend the tabs of the lock washer.

HINT:

Bend at least 2 of the lock washer tabs.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Torque Motor Toyota

Fig. 363: Bending Lock Washer Tabs

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 363: Bending Lock Washer Tabs

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

58. INSTALL TRANSMISSION CONTROL SHAFT LEVER LH

a. Install the washer and nut to the control shaft lever LH.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 364: Installing Washer And Nut To Control Shaft Lever LH Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

OIL PUMP

COMPONENTS

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

FRONT OIL PUMP BODY SUB-ASSEMBLY

STATOR SHAFT ASSEMBLY

FRONT OIL PUMP DRIVE GEAR / 0 FRONT OIL PUMP

FRONT OIL PUMP DRIVE GEAR / 0 FRONT OIL PUMP

1997 Avalon Oil Pump Failure
FRONT OIL PUMP DRIVEN GEAR

|N'm (<.gf*cm.ft-*lbf)|: Specified torque £ Non-reusable part p : 11."'* , *

Fig. 365: Identifying Oil Pump Components Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

DISASSEMBLY

1. REMOVE FRONT OIL PUMP BODY O-RING

a. Remove the O-ring from the oil pump assembly.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Torque Converter Ring
Fig. 366: Removing O-Ring From Oil Pump Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2. FIX OIL PUMP ASSEMBLY

a. Place the oil pump body on the torque converter clutch.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Torque Converter Clutch
Fig. 367: Placing Oil Pump Body On Torque Converter Clutch Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

3. REMOVE CLUTCH DRUM OIL SEAL RING

a. Remove the 3 oil seal rings.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Mk3 Supra Removing Clutch

Fig. 368: Removing Oil Seal Rings

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 368: Removing Oil Seal Rings

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

4. REMOVE STATOR SHAFT ASSEMBLY

a. Remove the 14 bolts, and then remove the stator shaft from the oil pump body.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 369: Removing Stator Shaft From Oil Pump Body Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

5. REMOVE FRONT OIL PUMP BODY O-RING

a. Remove the O-ring from the oil pump body.

b. Remove the oil pump body from the torque converter clutch.

6. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY (See INSPECTION )

7. INSPECT STATOR SHAFT ASSEMBLY (See INSPECTION )

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 370: Removing Front Oil Pump Body O-Ring Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

8. INSPECT CLEARANCE OF OIL PUMP ASSEMBLY (See INSPECTION )

9. REMOVE FRONT OIL PUMP DRIVE GEAR

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 371: Removing Front Oil Pump Drive Gear Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

10. REMOVE FRONT OIL PUMP DRIVEN GEAR

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

Fig. 372: Removing Front Oil Pump Driven Gear Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

  • umberto
    What is an automatic transmission control shaft?
    8 years ago

Post a comment