Torque Nm kgfcm ftlbf

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 136: Aligning Switch Groove With Neutral Basic Line Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

INSTALLATION

1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a. Install the park/neutral position switch with the bolt.

b. Install a new lock washer and the nut. Torque: 6.9 N*m (70 kgf*cm, 61 in.*lbf)

c. Bend the claws on the lock washer to stake the nut.

d. Adjust the park/neutral position switch (See PARK / NEUTRAL POSITION SWITCH ).

2. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 137: Connecting Park/Neutral Position Switch Connector Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment