Torque Nm kgfcm ftlbf

HINT:

At the time of installation, refer to the following: First install the green colored bolt and then the remaining 5 bolts.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 176: Removing Bolt And Rear End Plate Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

16. JACK UP TRANSMISSION SLIGHTLY

a. Securely support the transmission on a transmission jack. Lift the transmission slightly from the crossmember.

17. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY

a. Remove the 4 bolts of the engine rear mounting on the crossmember.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 177: Removing 4 Bolts Of Engine Rear Mounting On Crossmember Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Remove the 4 nuts, bolts, washers and crossmember.

18. REMOVE NO. 2 FRAME CROSSMEMBER SUBASSEMBLY

a. Remove the 4 bolts and engine rear mounting insulator.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

C126141

Fig. 178: Removing 4 Bolts And Engine Rear Mounting Insulator Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

19. REMOVE TRANSFER ASSEMBLY

a. A750E: Separate the wire harness from the transmission.

b. A750F: Separate the wire harness from the transmission and transfer.

c. Lower the rear end of the transmission.

d. Remove the 10 bolts and transmission.

Torque: A (17 mm head) 71 N*m (720 kgf*cm, 53 ft.*lbf) B (14 mm head) 37 N*m (380 kgf*cm, 27 ft.*lbf)

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

C115784E03

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment