Torque Nm kgfcm inlbf

d. Connect the solenoid connector.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 351: Installing Bolt

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 351: Installing Bolt

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

e. Connect the 7 solenoid connectors.

f. Install the ATF temperature sensor.

g. Install the clamp and the 2 bolts.

Torque: 10 N*m (100 kgf*cm, 7 ft.*lbf) for bolt A 11 N*m (112 kgf*cm, 8 ft.*lbf) for bolt B

HINT:

• Each bolt length is indicated bellow.

36 mm (1.42 in.) for bolt A 12 mm (0.47 in.) for bolt B

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

How Install Auto Transaxle Valve Body

D012704E03

Fig. 352: Installing Clamp And 2 Bolts

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

48. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

a. Coat a new O-ring with ATF, and install them to the valve body oil strainer assembly.

b. Install the oil strainer with the 4 bolts.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

A750e Transmission
Fig. 353: Installing Oil Strainer With Bolts Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

49. INSTALL TRANSMISSION OIL CLEANER MAGNET

a. Install the 4 transmission oil cleaner magnets.

50. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

a. Install a new gasket on the oil pan.

b. Install the 20 bolts.

c. Install the drain plug.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 354: Installing Transmission Oil Cleaner Magnets Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

51. INSTALL AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL

a. Using SST and a hammer, tap in a new oil seal.

SST 09710-30050, 09950-70010 (09951-07100)

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 355: Installing Automatic Transmission Extension Housing Oil Seal Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

52. INSTALL EXTENSION HOUSING DUST DEFLECTOR

a. Using SST and a hammer, tap in a new extension housing dust deflector.

SST 09223-15020, 09950-70010 (09951-07100)

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 356: Installing Extension Housing Dust Deflector Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

53. INSTALL EXTENSION HOUSING SUB-ASSEMBLY

a. Install the thrust needle roller bearing and the 2 bearing races.

b. Using a snap ring expander, install the snap ring.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 357: Installing Snap Ring Using Snap Ring Expander Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

c. Using feeler gauge, measure the clearance between the snap ring and the race.

Clearance:

If the Clearance is still standard, select another race. HINT:

There are 6 different thickness for the race.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 358: Measuring Clearance Between Snap Ring And Race Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Race thickness

RACE THICKNESS

No.

Thickness

No.

Thickness

1

3.7 mm (0.146 in.)

4

4.0 mm (0.158 in.)

2

3.8 mm (0.150 in.)

5

4.1 mm (0.161 in.)

3

3.9 mm (0.154 in.)

5

4.2 mm (0.165 in.)

d. Install the gasket to the extension housing. HINT:

Take care not to drop the gasket.

e. Clean the threads of the bolts and the case with white gasoline.

f. Apply FIPG to the extension housing.

FIPG:

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Part No. 08826-00090, THREE BOND 1281 or equivalent

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • norman
    How to install auto transaxle valve body?
    8 years ago

Post a comment