Toyota Sequoia Limited

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

0.2 to 0.6 mm (0.008 to 0.024 in.) Maximum clearance: 0.65 mm (0.026 in.)

If the clearance is greater than the maximum, replace the planetary gear assembly.

Fig. 278: Measuring Rear Planetary Gear Pinion Thrust Clearance Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Using a dial indicator, measure the inside diameter of the rear planetary gear bushing.

Maximum inside diameter:

If the inside diameter is greater than the maximum, replace the rear planetary gear assembly.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 279: Measuring Inside Diameter Of Rear Planetary Gear Bushing Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

17. INSPECT 1ST AND REVERSE BRAKE RETURN SPRING SUB-ASSEMBLY

a. Using a vernier caliper, measure the free length of the spring together with the spring seat.

Standard free length: 23.74 mm (0.935 in.)

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

d029830e01

Fig. 280: Measuring Free Length Of Spring Together With Spring Seat Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

18. INSPECT PACK CLEARANCE OF FIRST AND REVERSE BRAKE

a. Make sure the 1st and reverse brake pistons move smoothly when applying and releasing the compressed air into the transmission case.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 281: Inspecting Pack Clearance Of First And Reverse Brake Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment