Transmission Wire Side Connector Front View

c110342e38

Fig. 87: Identifying E1 Transmission Wire Connector Terminals Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

OK: GO TO NEXT STEP.

2. CHECK WIRE HARNESS AND CONNECTOR (TRANSMISSION WIRE - ECM)

a. Connect the E1 transmission wire connector.

b. Disconnect the E7 ECM connector.

c. Measure the resistance.

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia

TESTER CONNECTION SPECIFIED CONDITION AND RESISTANCE REFERENCE

Tester Connection

Specified Condition

E7-13 (SLT+) - E6-12 (SLT-)

5.0 to 5.6 ohms at 20°C (68°F)

E7-13 (SLT+) - Body ground

10 kohms or higher

E7-12 (SLT-) - Body ground

10 kohms or higher

NG: REPAIR OR REPLACE HARNESS OR CONNECTOR

NG: REPAIR OR REPLACE HARNESS OR CONNECTOR

Fig. 88: Identifying E7 ECM Connector Terminals Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment