Turbine Speedoutput Speed Reference

Turbine speed/Output speed (NT/NO)

3.30 to 7.50

ON malfunction (C)

TURBINE SPEED/OUTPUT SPEED REFERENCE

Turbine speed/Output speed (NT/NO)

1.91 to 2.35

ON malfunction (D)

TURBINE SPEED/OUTPUT SPEED REFERENCE

Turbine speed - Output speed x 4th gear ratio (NT - NO x 4th gear ratio)

1,000 rpm or more

ON malfunction (E)

TURBINE SPEED/OUTPUT SPEED REFERENCE

Turbine speed - Output speed x 5th gear ratio (NT - NO x 5th gear ratio)

1,000 rpm or more

HINT:

Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time.

The DATA LIST can be displayed during the ACTIVE TEST.

1. Warm up the engine.

2. Turn the ignition switch OFF.

3. Connect the intelligent tester to the CAN VIM. Then connect the CAN VIM to the DLC3.

4. Turn the ignition switch ON.

5. Turn the intelligent tester ON.

6. Enter the following menus: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST.

7. Follow the instructions on the tester and perform the ACTIVE TEST.

HINT:

While driving, the shift position can be forcibly changed with the intelligent tester.

Comparing the shift position commanded by the ACTIVE TEST with the actual shift position enables you to

2006 TRANSMISSION A750F Automatic Transaxle - Sequoia confirm the problem (See DIAGNOSIS SYSTEM ).

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment