Values Do not depend solely on these reference values when deciding whether a part is faulty or not

1. Warm up the engine.

2. Turn the ignition switch OFF.

3. Connect the intelligent tester to the CAN VIM. Then connect the CAN VIM to the DLC3.

4. Turn the ignition switch ON.

5. Turn the intelligent tester ON.

6. Enter the following menus: DIAGNOSIS / ENHANCED OBD II / DATA LIST.

7. Follow the instructions on the tester and read the DATA LIST.

DATA LIST

Item/Range

(Display)

Normal Condition

Diagnostic Note

PNP SW (NSW)

PNP switch status/ON or OFF

Shift lever position is; P or N: ON Except P or N: OFF

REVERSE

PNP switch status/ON or OFF

Shift lever position is; R: ON

Except R: OFF

DRIVE

PNP switch status/ON or OFF

Shift lever position is; D: ON

Except D: OFF

When shift lever position displayed on intelligent tester differs from actual position, adjustment of PNP switch or shift cable may be incorrect.

3RD

PNP switch status/ON or OFF

Shift lever position is; 3: ON

Except 3: OFF

2ND

PNP switch status/ON or OFF

Shift lever position is; 2 and L: ON Except 2 and L: OFF

Shift lever

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

position is 2: OFF

LOW

PNP switch status/ON or OFF

Shift position L switch Push: ON

Shift position L switch Push: OFF

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment