Total OBD & ECU Auto Diagnostics
a. Connect the connectors to the occupant classification ECU and the center airbag sensor assembly.
b. Connect the negative (-) terminal cable to the battery.
c. Turn the ignition switch to the ON position.
d. Clear the DTCs stored in memory (See DTC CHECK / CLEAR ).
First clear DTCs stored in the occupant classification ECU and then in the center airbag sensor assembly.
e. Turn the ignition switch to the LOCK position.
f. Turn the ignition switch to the ON position.
g. Using the intelligent tester, check the DTCs of the occupant classification ECU (See DTC CHECK / CLEAR ).
Was this article helpful?
Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.
Get My Free Ebook