Check Front Passenger Airbag Assembly

a. Turn the ignition switch to the LOCK position.

Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds. From the step 9:

Disconnect the SST from connector "C".

Connect the connector to the front passenger airbag assembly.

e. Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.

f. Turn the ignition switch to the ON position, and wait for at least 60 seconds.

g. Clear the DTCs stored in memory (See DTC CHECK / CLEAR ).

h. Turn the ignition switch to the LOCK position.

Fig. 252: Checking Front Passenger Airbag Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2007 RESTRAINTS Supplemental Restraint System - Sequoia

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment