Check Side Airbag Assembly Lh Side Squib Lh

Total OBD & ECU Auto Diagnostics

Total OBD & ECU Auto Diagnostics

Get Instant Access

a. Turn the ignition switch to the LOCK position.

b. Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.

Disconnect the service wire from connector "C".

d. Connect the connector to the side airbag assembly LH.

e. Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.

f. Turn the ignition switch to the ON position, and wait for at least 60 seconds.

g. Clear the DTCs stored in memory (See DTC CHECK / CLEAR ).

Lexus B1400
Fig. 272: Checking Side Airbag Assembly LH (Side Squib LH) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

h. Turn the ignition switch to the LOCK position.

i. Turn the ignition switch to the ON position, and wait for at least 60 seconds. j. Check the DTCs (See DTC CHECK / CLEAR ).

2007 RESTRAINTS Supplemental Restraint System - Sequoia

HINT:

Codes other than DTC B1825, B1826, B1827 and B1828 may be output at this time, but they are not related to this check.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment