Check Side Airbag Assembly Rh Side Squib Rh

Total OBD & ECU Auto Diagnostics

Total OBD & ECU Auto Diagnostics

Get Instant Access

a. Turn the ignition switch to the LOCK position.

b. Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.

Disconnect the service wire from connector "C".

Connect the connector to the side airbag assembly RH.

Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.

f. Turn the ignition switch to the ON position, and wait for at least 60 seconds.

g. Clear the DTCs stored in memory (See DTC CHECK / CLEAR ).

Fig. 262: Checking Side Airbag Assembly RH (Side Squib RH) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

h. Turn the ignition switch to the LOCK position.

i. Turn the ignition switch to the ON position, and wait for at least 60 seconds. j. Check the DTCs (See DTC CHECK / CLEAR ).

2007 RESTRAINTS Supplemental Restraint System - Sequoia

Codes other than DTC B1820, B1821, B1822 and B1823 may be output at this time, but they are not related to this check.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment