Check Srs Warning Light

a. Connect the connectors to the center airbag sensor assembly.

b. Connect the connectors to the steering wheel pad.

c. Connect the connectors to the front passenger airbag assembly.

d. with Side and curtain shield airbag:

Connect the connectors to the side airbag assembly LH and RH.

e. with Side and curtain shield airbag:

Connect the connectors to the curtain shield airbag assembly LH and RH.

f. Connect the connectors to the front seat outer belt LH and RH.

g. Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.

h. Turn the ignition switch to the ON position, and wait for at least 6 seconds.

i. Operate all components of the electrical system (defogger, wiper, headlight, heater blower, etc.) and check the SRS warning light operation.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment