Connect the terminals to the correct positions to avoid a malfunction

Total OBD & ECU Auto Diagnostics

TOAD ECU Tuning Software

Get Instant Access

2007 RESTRAINTS Supplemental Restraint System - Sequoia

2. Turn the ignition switch to the ON position, and wait for approximately 60 seconds. c. Read the DTCs.

Read the blinking patterns of the DTCs. As examples, the blinking patterns for trouble codes 11 and 31 are shown in the illustration to the left.

• Normal system code (with out past trouble code) The light blinks twice per second.

• Normal system code (with past trouble code) When the past trouble code is stored in the airbag sensor assembly center, the light blinks only once per second.

The first blinking indicates the first DTC. The second blinking occurs after a 1.5-second pause.

2007 RESTRAINTS Supplemental Restraint System - Sequoia

Fig. 51: Identifying Blinking Pattern

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 51: Identifying Blinking Pattern

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

If there are more than 1 code, there will be a 2.5-second pause between each code. After all codes

2007 RESTRAINTS Supplemental Restraint System - Sequoia are shown, there will be a 4.0-second pause, and they all will be repeated. HINT:

• If 2 or more malfunctions are found, the indication begins with the smallest numbered code.

• If DTCs are indicated without connecting the terminals, proceed to the " " on page DI-1498. 2. CLEAR DTC (Using SST service wire)

a. Clear the DTCs.

1. When the ignition switch is turned off, the DTCs are cleared.

HINT:

Some DTC may not be cleared by turning off the ignition switch. In this case, proceed to the next procedure.

2. Using SST, connect terminals TC and CG of the DLC3, and then turn the ignition switch to the ON position.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment