Disassemble Differential Case

a. Using a pin punch and hammer, remove the straight pin.

b. Remove the pinion shaft, 2 pinion gears, pinion gear thrust washers, side gears and side gear thrust washers from the differential case.

2007 DRIVELINE/AXLES Differential - Sequoia

Differential
Fig. 51: Removing Straight Pin Using a pin punch & hammer Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

23. REMOVE FRONT DIFFERENTIAL CASE BEARINGS

a. Using a brass bar and hammer, remove the 2 bearings.

2007 DRIVELINE/AXLES Differential - Sequoia

Toyota Sequoia Differential Case
Fig. 52: Removing Front Differential Case Bearings Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

REPLACEMENT

1. REPLACE FRONT DIFFERENTIAL DUST DEFLECTOR

a. Using SST, a socket wrench and a press, remove the dust deflector.

SST 09950-00020

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 53: Removing Front Differential Dust Deflector Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Using SST and a press, install a new dust deflector.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment