Disconnection Of Connector For Front Airbag Sensor

a. Push down the housing lock (white part) and slide the CPA (yellow part). (At this time, the connector cannot be disconnected yet).

b. Push down the housing lock (white part) again and disconnect the connector. HINT:

Do not push down the A part shown in the illustration when disconnecting.

Fig. 17: Pushing Down Housing Lock And Slide CPA Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Y Mioi^s^iroi

Fig. 17: Pushing Down Housing Lock And Slide CPA Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

c. After disconnecting the connector, check that the position of the housing lock (the white part) is as shown in the illustration.

2007 RESTRAINTS Supplemental Restraint System - Sequoia

Fig. 18: Checking Position Of Housing Lock Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment