Install Differential Side Gear Shaft

a. Install a new snap ring to the shaft.

b. Using a plastic hammer, install the shaft to the differential case.

c. Check that the intermediate shaft will not come out by trying to pull it out by hand.

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 89: Installing Shaft To Differential Case Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

30. INSTALL DIFFERENTIAL CLUTCH CASE TO DIFFERENTIAL TUBE

a. Install a new O-ring to the tube.

b. Coat the O-ring with MP grease.

c. Install the clutch case to the tube.

d. Using a "Torx" socket (E14), torque the 2 Torx bolts.

31. INSTALL DIFFERENTIAL CLUTCH SLEEVE

32. INSTALL FRONT DIFFERENTIAL TUBE TO DIFFERENTIAL

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 90: Installing Front Differential Tube To Differential Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

a. Remove any old FIPG material and be careful not to drop oil on the contact surfaces of the differential and clutch case.

b. Clean both installation surfaces with gasoline or alcohol.

c. Apply FIPG to the differential, as shown in the illustration.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment