Install Rear Drive Pinion Companion Flange Subassembly

a. Place the companion flange.

b. Coat the threads of a new nut with hypoid gear oil.

c. 2WD: Torque the companion flange nut.

1. Install the 3 stud bolts so that the heads come out 40 mm (1.57 in.).

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 154: Installing Stud Bolts So That Heads Come Out 40 Mm (1.57 In.) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2. Set the SST and install the 3 nuts to the companion flange.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment