Install Ring Gear

a. Clean the contact surfaces of the differential case and ring gear.

b. Heat the ring gear to about 100°C (212°F) in boiling water.

c. Carefully take the ring gear out of the boiling water.

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 128: Heating Ring Gear In Boiling Water Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

d. After the moisture on the ring gear has completely evaporated, quickly install the ring gear to the differential case.

HINT:

Align the matchmarks on the ring gear and differential case.

e. After the ring gear has cooled sufficiently, torque the set bolts to which thread lock has been applied.

Thread lock: Part No. 08833-00100, THREE BOND 1360K or equivalent. Torque: 125 N*m (1,270 kgf*cm, 92 ft.*lbf)

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 129: Installing Ring Gear To Differential Case Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment