Ng Repair Or Replace Cowl Wire

2007 RESTRAINTS Supplemental Restraint System - Sequoia

2007 RESTRAINTS Supplemental Restraint System - Sequoia

OK: GO TO NEXT STEP.

11. CHECK COWL WIRE (AIRBAG SENSOR ASSEMBLY - BODY GROUND)

a. Turn the ignition switch to the LOCK position.

b. Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.

c. Measure the resistance according to the value(s) in the table below.

TESTER CONNECTION SPECIFIED CONDITION CHART

Tester Connection

Condition

Specified Condition

A20-17 (P-AB) - Body ground

Always

1 Mohms or higher

A20-23 (PAON) - Body ground

Always

1 Mohms or higher

NG: REPAIR OR REPLACE COWL WIRE

Fig. 141: Checking Cowl Wire (Airbag Sensor Assembly - Body Ground) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

OK: GO TO NEXT STEP.

12. CHECK INTEGRATION CONTROL AND PANEL (PASSENGER AIRBAG ON/OFF INDICATOR)

2007 RESTRAINTS Supplemental Restraint System - Sequoia a. Connect the connector to the integration control and panel.

b. Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.

c. Turn the ignition switch to the ON position.

d. Check that the passenger airbag ON/OFF indicator condition in the table below. OK

TESTER CONNECTION SP]

ECIFIED CONDIT

ION CHART

Tester Connection

Condition

Indicator

I19-16 (PAON) - Body ground

Ignition switch ON

ON indicator comes on

I19-17 (P-AB) - Body ground

Ignition switch ON

OFF indicator comes on

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment