NOTE As there is no spacer tighten the nut a little at a time and be careful not to overtighten it

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 74: Tighten Nut Using SST To Hold Flange Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

e. Using a torque wrench, measure the preload of the drive pinion using the backlash between the drive pinion and ring gear.

Preload (at starting): New bearing 1.1 - 1.8 N*m(11 - 18 kgf*cm, 9.7 - 15.9 in.*lbf) Reused bearing 0.5 - 0.9 N*m(5 - 9 kgf*cm, 4.4 - 8.0 in.*lbf)

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 75: Measuring Preload Of Drive Pinion Using Backlash Between Drive Pinion & Ring

Gear Using A Torque Wrench

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 75: Measuring Preload Of Drive Pinion Using Backlash Between Drive Pinion & Ring

Gear Using A Torque Wrench

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment