NOTE Do not punch the marks

b. Using a snap ring expander, pull out the outboard joint shaft while expanding the snap ring.

2007 DRIVELINE/AXLES Drive Shaft - Sequoia

Fig. 9: Pulling Out Outboard Joint Shaft While Expanding Snap Ring, Using A Snap Ring Expander

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 9: Pulling Out Outboard Joint Shaft While Expanding Snap Ring, Using A Snap Ring Expander

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

5. REMOVE FRONT DRIVE SHAFT INBOARD JOINT BOOT

6. REMOVE OUTBOARD JOINT BOOT

7. REMOVE FRONT AXLE HUB DUST SEAL

a. Using SST and a press, remove the dust seal.

SST 09950-00020

2007 DRIVELINE/AXLES Drive Shaft - Sequoia

Fig. 10: Removing Front Axle Hub Dust Seal Using SST & A Press Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

8. REMOVE FRONT DRIVE SHAFT DUST COVER

a. Using SST and a press, remove the dust cover.

SST 09950-00020

2007 DRIVELINE/AXLES Drive Shaft - Sequoia

Fig. 11: Remove Dust Cover Using SST & A Press Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

REASSEMBLY

1. INSTALL FRONT DRIVE SHAFT DUST COVER

a. Using a screwdriver and hammer, install a new dust cover.

2. INSTALL FRONT AXLE DUST SEAL

a. Using a screwdriver and hammer, install a new dust seal.

2007 DRIVELINE/AXLES Drive Shaft - Sequoia

Fig. 12: Installing Front Axle Dust Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 12: Installing Front Axle Dust Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment